Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

8. Messages
420
8.10 KAPL10001 to KAPL11000
KAPL10001-W
No parameter has been specified.
Details
No directory to which the collected information will be output has been specified.
Action
Check the parameters of the
DLMgetras utility for collecting HDLM error
information, and then retry. For details on the
DLMgetras utility, see
7.2 DLMgetras Utility for Collecting HDLM Error Information.
KAPL10002-W
Too many parameters have been specified.
Details
Four or more parameters have been specified.
Action
Check the parameters of the
DLMgetras utility for collecting HDLM error
information, and then retry. For details on the
DLMgetras utility, see
7.2 DLMgetras Utility for Collecting HDLM Error Information.
KAPL10003-W
The first parameter has not been set to a directory. Value = aa...aa
Details
The first parameter must be set to a directory to which collected information is
output.
aa...aa: First parameter
Action
Check the parameters of the
DLMgetras utility for collecting HDLM error
information, and then retry. For details on the
DLMgetras utility, see
7.2 DLMgetras Utility for Collecting HDLM Error Information.
KAPL10004-W
The parameter contains an incorrect value. Value = aa...aa
Details
The first parameter must be a directory. The second parameter must be
-f.
aa...aa: Invalid parameter