Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

8. Messages
451
KAPL13012-W
Too many parameters have been specified.
Action
Specify the
-h option in the HDLM migration support utility, confirm the option
that should be specified, and then re-execute. For details about the
dlmmigsts
utility, see 7.6 dlmmigsts Utility for Assisting HDLM Migration.
KAPL13013-E
The directory for storing the specified file could not be
created. Filename = aa...aa
Details
aa...aa: Filename (character string)
Action
There is not enough capacity to store the specified file in the directory. Make sure
there is enough capacity, and then try again. For details about the
dlmmigsts
utility, see 7.6 dlmmigsts Utility for Assisting HDLM Migration.
KAPL13014-E
An internal error occurred in the dlmmigsts utility. Error Code
= aa...aa Execute the DLMgetras utility to collect error
information, and then contact your vendor or maintenance
company. Refer to the HDLM User's Guide for instructions how to
execute the DLMgetras utility.
Details
aa...aa: Error Code (decimal number)
Action
Contact your HDLM vendor or the maintenance company if there is a
maintenance contract for HDLM.
KAPL13015-E
There is an invalid character in the file. parameter = aa...aa,
Filename = bb...bb
Details
aa...aa: Parameter (character string)
bb...bb: Filename (character string)
Action
If parameter =
-odm, execute dlmodmset one after another, or specify the
modified
odmsetfile in dlmmigsts again, and then re-execute. For details
about the
dlmmigsts utility, see 7.6 dlmmigsts Utility for Assisting HDLM