Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

B. Differences Between HDLM Version 5.9 or Later and Version 5.8.1 or Earlier
472
• dlmcfgmgr utility for managing the HDLM configuration
In HDLM version 5.9 or later, the AIX
cfgmgr command is used.
•
dlmchkdev utility for checking the HDLM device configuration
•
dlmHBAdel utility for changing the HDLM HBA
Also, the execution target of the
dlmrmdev utility for removing HDLM drivers
has been changed from
dlmfdrv to hdisk.
B.3 Changing the HDLM Environment Configuration and Operation
Procedures by Changes to the Logical Device Files
For the same reason explained in B.2 Simplifying the HDLM Environment
Configuration and Operation Procedures by Changes to the Logical Device Files, the
following HDLM environment configuration and operation procedures have been
changed:
• New installation and update installation of HDLM
#
dlmimportvg importvg
dlmlistvgbackup listvgbackup
dlmlsvg lsvg
dlmmirrorvg mirrorvg
dlmmkvg mkvg
dlmrecreatevg recreatevg
dlmreducevg reducevg
dlmreorgvg reorgvg
dlmrestorevgfiles restorevgfiles
dlmrestvg restvg
dlmsavevg savevg
dlmsyncvg syncvg
dlmunmirrorvg unmirrorvg
dlmvaryoffvg varyoffvg
dlmvaryonvg varyonvg
Commands of the utilities for operating HDLM
volume groups
Corresponding AIX commands