Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

2. HDLM Functions
41
2.10.1 Types of Collected Logs
HDLM collects information on the detected error and trace information in the
integrated trace file, trace file, error logs, HDLM utility's log file, and syslog. You can
use the error information to examine the status of an error and analyze the cause of the
error.
Table 2-7: Types of error information describes the types of error information.
Table 2-7: Types of error information
Log
name
Description Output destination
Integrated
trace file
Operation logs of the HDLM command are collected. The default file path is
/var/opt/
hitachi/HNTRLib2/spool/
hntr2[1-16].log
.
To specify the output destination
directory and the file prefix for the
integrated trace file, use a Hitachi
Network Objectplaza Trace
Library (
HNTRLib2) utility.
Trace file Trace information on the HDLM manager is collected at the
level specified by the user. If an error occurs, you might need
to change the settings to collect trace information.
The trace file name is
/var/
DynamicLinkManager/log/
hdlmtr[1-64].log
Error log Error information is collected for the user-defined level. By
default, HDLM collects all error information.
HDLM Manager logs:
/var/DynamicLinkManager/
log/dlmmgr[1-16].log
Hitachi Command Suite Common
Agent Component logs:
/var/DynamicLinkManager/
log/dlmwebagent[1-N].log
The value n depends on the setting
in the file
dlmwebagent.properties.
HDLM
utility's
log file
Logs are collected when the HDLM utility is executed. The following is the log file name:
/var/DynamicLinkManager/
log/dlmutil[1-2].log
Syslog The HDLM messages on or above the level set by the user
with
/etc/syslog.conf are collected.
#
We recommend that you configure the system so that
information at the Information level and higher is output.
Syslogs can be checked using a text editor.
Syslog is not output by default.
To output syslog, The syslog file
path is specified in the file
/etc/
syslog.conf
. For details, see the
AIX documentation.
HDLM
Inquiry
log
An HDLM Inquiry log is a response log when the Inquiry
command is issued to the hdisk.
/var/DynamicLinkManager/
log/dlminquiry[1-2].log