Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

3. Creating an HDLM Environment

Every SP is applicable, unless otherwise specified.

To set up a boot disk environment that uses Thunder 9500V series, Hitachi AMS/

TMS/WMS series, or Hitachi SMS, use SP2 or a later service pack.

An environment in which the Secure by Default functionality is enabled during

installation of the OS is not supported.

To set up a boot disk environment that uses a storage system of the Thunder

9500V series or the Hitachi AMS2000/AMS/WMS/SMS series, apply SP2 or a

later service pack.

Prerequisite Programs for HDLM

Before you install HDLM, confirm that the required programs written below have been

installed. For details about HTC_ODM and XP_ODM, contact the storage system

vendor.

 VisualAge C++ Runtime 5.0.0.0 or later, IBM XL C/C++ V7 Runtime 7.0.0.0 to

IBM XL C/C++ V8 Runtime 8.0.0.0 or 8.0.0.6 or later (8.0.0.1 to 8.0.0.5 are not

supported), IBM XL C/C++ V9 Runtime 9.0.0.1 or later, or IBM XL C/C++ V10

Runtime 10.0.0.1 or later, or IBM XL C/C++ V11 Runtime 11.1.0.1 or later

Execute the following command, as applicable, to check the runtime version:

For AIX 5L V5.3:

# lslpp -L xlC.aix50.rte

For AIX V6.1

# lslpp -L xlC.aix61.rte

For AIX V7.1

# lslpp -L xlC.aix61.rte

AIX V7.1 (Virtual I/O Server)

ioslevel 2.1.0.xx to 2.2.0.xx (where xx is a number)

OS Kernel