Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

3. Creating an HDLM Environment
75
3.5 Installing HDLM
When you install HDLM, Hitachi Network Objectplaza Trace Library will also be
installed. The file path of the integrated trace information file of Hitachi Network
Objectplaza Trace Library is
/var/opt/hitachi/HNTRLib2/spool/
hntr2
n.log, where n is the number of the integrated trace information file.
3.5.1 Available Installation Methods
To install HDLM, use one of the following procedures:
 Use installux.sh.
By using
installux.sh, you can install HDLM from the DVD-ROM or the
directory to which the contents of the DVD-ROM have been copied without
needing to consider the location in which the files to be installed are stored. You
can use the
installux.sh command to perform the following installations:
• New installation
• Upgrade installation
• Re-installation
• Unattended installation
 Use SMIT or the installp command.
You can also copy the contents of the HDLM DVD-ROM to a desired directory,
and then perform installation from that directory.
Copy the following files from the installation DVD-ROM to the same directory:
•
DLManager.bff
• .toc
To use SMIT, in software-input-device/directory specify the directory in which
the contents of the DVD-ROM have been copied.
 Unattended installation
An unattended installation enables a user to install HDLM without entering
information. For details about how to perform an unattended installation of
HDLM, see 3.5.8 Performing an Unattended Installation of HDLM.
 Installation on alternate disks
By using the
alt_disk_copy or nim command of AIX, you can replicate the
running system (clone) on an alternate disk, and then perform an upgrade
installation or re-installation of HDLM in AIX on the alternate disk. The hdisk