Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

3. Creating an HDLM Environment
77
#
Only upgrade installations and re-installations are supported.
Table 3-8: Combination of Installation Methods that Are Available in an
HACMP Environment and the Supported Installation Environments
Legend:
Yes: Can be executed
No: Cannot be executed
#1
Only new installations, upgrade installations, and re-installations are supported.
#2
Only upgrade installations and re-installations are supported.
The installation procedures are explained in this manual in the locations shown below.
installux.sh or installp command
3.5.3 Performing a New Installation of HDLM, 3.5.5 Performing an Upgrade
Installation or Re-installation of HDLM, (1) Upgrading or Re-installing HDLM
in an HACMP Environment (in a Local Boot Disk Environment) in
3.5.7 Installing HDLM in an HACMP Environment, and (2) Upgrading or
Re-installing HDLM in an HACMP Environment (in a Boot Disk Environment) in
3.5.7 Installing HDLM in an HACMP Environment.
Unattended installation
3.5.8 Performing an Unattended Installation of HDLM
Installation method Installation environment
Host Virtual I/O server
Local boot
disk
environment
Boot disk
environment
Local boot disk
environment
Boot disk
environment
installux.sh
#1
or
installp command
Yes Yes Yes Yes
SM IT Yes Yes Yes Yes
Unattended installation No No No No
Installation on alternate
disks
Yes
#2
Ye s
#2
Yes
#2
Yes
#2