HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 87
If you have specified n (do not restart) for the restart key in the installation-
information settings file, go to step 12.
If you have specified y (restart) for the restart key in the installation-information
settings file, go to step 17.
4. The program checks the version of the MPIO driver, and then installs the MPIO driver. If
a message appears, asking you whether you want to install MPIO driver, follow the
procedure below:
– The KAPL09127-W message appears if MPIO driver has already been installed and its
version does not match the version of MPIO driver to be installed:
– Click the Next button to install MPIO driver.
– Click the Cancel button to cancel the installation.
– If no message appears, go to the next step.
5. Follow the instructions shown in the messages that appear on the window. If a license
key file was stored in step 2, specify that license key file. If a license key file is not
used, specify the license key directly.
6. Enter user information in accordance with the instructions shown in the messages that
appear on the window.
7. Specify the installation folder in accordance with the instructions shown in the messages
that appear on the window.