HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 89
12. Check the results of the installation.
If you performed an unattended installation, check the installation results in the
command prompt.
13. When the installation finishes, execute the dlmprsvkey utility with the -v parameter
specified.
Make sure that the PRSV key displayed by the dlmprsvkey utility is unique among those
of any other hosts in the SAN. If the PRSV key is not unique or is not registered, or if the
KAPL09131-W message appears, execute the dlmprsvkey utility with the -r parameter
specified to re-register the PRSV key. If the PRSV key is not registered, the HDLM
functions may not operate normally. For details about the dlmprsvkey utility, see
section
8.4.
If you used the license key file, it will be deleted when the installation finishes. The
KAPL09115-W message appears if deletion of this file fails. In this case, delete the file
manually, such as by using Explorer.
14. Shut down the host. Leave the host in a single-path configuration until you check (in
step 21) whether HDLM has been successfully installed.
15. Modify the settings in the storage system. Modify the settings in the storage system
according to the procedure described in the hardware notes provided with HDLM.
16. Start the host.
17. Log on to the Windows system again as a member of the Administrators group.
18. Check the log file and PRSV key.
If you installed HDLM by using an unattended installation and specified y (restart) for
the restart key in the installation-information settings file, make sure that the
KAPL09181-I message is output to installhdlm.log. For details about this log file, see
section
3.6.2.3 or 3.6.2.4.
Make sure that the PRSV key displayed by the dlmprsvkey utility is unique among the
hosts in the SAN. If the PRSV key is not unique or is not registered, or if the KAPL09131-
W message appears, execute the dlmprsvkey utility with the -r parameter specified to
re-register the PRSV key. If the PRSV key is not registered, HDLM functions might not
operate normally. For details about the dlmprsvkey utility, see section
8.4. If you used
the license key file, it will be deleted when the installation finishes. The KAPL09115-W
message appears if deletion of this file fails. In this case, delete the file manually, such
as by using Explorer.
19. Log on to the Windows system again as a member of the administrators group.
20. Execute the dlnkmgr command's view operation to display the status of each program.
An example of executing the dlnkmgr command's view operation follows:
>dlnkmgr view -sys
HDLM Version : xx-xx
Service Pack Version :
Load Balance : on(rr)
Support Cluster : off
Elog Level : 3
Elog File Size (KB) : 9900
Number Of Elog Files : 2