HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

92 Chapter 3 Creating an HDLM Environment
– Click the Cancel button to cancel the installation.
– If no message appears, go to the next step.
8. Specify a license key file or enter a license key in accordance with the instructions
shown in the messages that appear on the window. If a license key file was stored in
step 5, specify that license key file. If a license key file is not used, specify the license
key directly.
9. Enter user information in accordance with the instructions shown in the messages that
appear on the window.
10. Specify the installation folder in accordance with the instructions shown in the messages
that appear on the window.
11. The utility for registering HDLM persistent reservation keys (dlmprsvkey) is
automatically executed to create a PRSV key. The PRSV key is required for the HDLM
functions to operate normally. Also, the value of the PRSV key must be unique among
hosts. Creation of the PRSV key may be unsuccessful if, for example, an NIC does not
exist. Do one of the following in accordance with the result of the execution of the
dlmprsvkey utility:
– If the key creation is successful, the created PRSV key appears in the dialog box. If
you do not need to change the value, click the Next button. If you must change the
value because another host already has the same PRSV key, change the value, and
then click the Next button. If you want to undo the change, click the Back button
and then start over from step 10.
– If the creation is unsuccessful, a dialog box appears that prompts you for the PRSV
key. Enter the PRSV key, and then click the OK button.
For the values you can specify for the PRSV key, follow the instructions shown in the
installation program window.
12. The program checks the PRSV key. If the KAPL09128-W message appears, follow the
procedure below:
– You are prompted to re-enter the PRSV key. Enter an appropriate PRSV key. The
program then checks the PRSV key again.
– If no message appears, go to the next step.
13. Select an HDLM management-target device only when the operating system is one of the
following:
– Windows Server 2003 (IA32) SP1 or later
– Windows Server 2003 (IA32) R2
– Windows Server 2003 (IPF) SP1 or later
The Hitachi USP V, TagmaStore, Lightning, Thunder Series and HP StorageWorks XP
Series option is always selected. To select the EMC DMX series and EMC CX series as the
HDLM management-target device, select EMC Symmetrix DMX Series, CLARiiON CX
Series. To select the HP EVA series as the HDLM management-target device, select HP
StorageWorks EVA Series.
14. Follow the instructions shown in the messages that appear on the window.