HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 109
3.6.6 Installing JRE
To start HDLM GUI, an HDLM uses the JRE that is bundled with the HDLM product (JRE 1.3.1
provided by Sun Microsystems, Inc.).
For HDLM version 5.8 or later, a JRE whose version differs from the one bundled with HDLM
can be used to start HDLM GUI. (You can use JRE 1.4.2_13 (32 bit), JRE 5.0_05 (32 bit), or
JRE 5.0_10 (32 bit), all provided by Sun Microsystems, Inc.)
Note:
When certain conditions are met, a JRE whose version differs from the one bundled with
HDLM cannot be used to start HDLM GUI. For details on the conditions, see section
4.2.1.
To install JRE:
1. Download the JRE from the Sun Microsystems website.
2. Install the downloaded JRE on the host where the HDLM has been installed.
Do not install the JRE directly in HDLM-installation-folder\jre_user. If you do
this accidentally, uninstall the JRE, and then reinstall it in another folder.
3. To the following folder, copy all the configuration files, including the JRE installation
folder.
HDLM-installation-folder\jre_user
Notes:
 If both versions (JRE 1.4.2_13 (32 bit) and JRE 5.0_05 (32 bit)) have been installed in the
above folder, HDLM will use JRE 5.0_05 (32 bit).
 If you uninstall HDLM, HDLM-installation-folder\jre_user is deleted.