HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

118 Chapter 3 Creating an HDLM Environment
Figure 3.7 Single Path and Multi-Path Configurations
5. Start the uninstallation program. In Control Panel, choose Add/Remove Programs, and
then Change or Remove Programs. From the list of programs, select Dynamic Link
Manager, and click the Change/Remove button.
6. The dlmchkpath utility is automatically executed. If a warning dialog box appears,
follow this procedure:
– Cancel the uninstallation. Reconfigure the system into a single-path configuration,
and then perform the uninstallation again. For details about the dlmchkpath
utility, see section
8.5.
– If a warning dialog box is not displayed, go to the next step.
7. Follow the instructions shown in the messages that appear on the window. Uninstall
HDLM from all the hosts that make up the cluster. If the KAPL09005-E message appears,
stop the HDLM manager according to the procedure in section
4.5.2. After stopping the
HDLM manager, restart the uninstallation program.
8. When uninstallation finishes, shut down all the hosts that make up the cluster.
9. Confirm that all hosts are turned off, and are in a single-path configuration.
10. Start each of the hosts that make up the cluster.
3.9.3.3 Uninstallation Procedure for an Oracle RAC Environment
To uninstall HDLM in an Oracle RAC environment:
1. Log on to Windows as a member of the administrators group.
2. Stop the Oracle RAC instance of the host where HDLM is to be uninstalled.