HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

134 Chapter 4 HDLM Operation
If you attempt to change the status of multiple paths but the status of one of those
paths cannot be changed, the KAPL02022-W or KAPL02023-W message appears. To ignore
the path whose status cannot be changed and to continue processing, click the OK
button. To stop processing, click the Cancel button.
4.2.6.2 Changing the Path Status from the List Format
To change the path status when path information is displayed in list format:
1. Display the Path Management window. The Path List view of the Path Management
window is displayed.
2. In the tree frame, select the host, storage system, or LU connected to the path whose
status you want to change.
If a host is selected, information on all paths connected to the host is displayed in a list
in the view frame. If a storage system is selected, information on the paths that connect
the host and the selected storage system is displayed in a list in the view frame. If an LU
is selected, information on the paths that connect the host and the selected LU is
displayed in a list in the view frame. Note that the paths to be displayed in the Path List
view can be restricted or expanded using the Type and Status check boxes in the view
frame. For details on the tree frame, see section
6.2.2. For details on the Path List view
in the view frame, see section
6.2.4.
3. Select the path whose status you want to change. To select paths on which you want to
perform an operation, use any of the following methods:
– To select one line only, you can click the line that displays the information for the
path you want to perform an operation on.
– To select a range of lines, you can click the top and the bottom lines of the desired
range while pressing the Shift key.
– To select a range of lines, you can drag the mouse over the lines.
Note that some paths might remain unselected depending on the speed of your
mouse drag.
– To select multiple lines, you can click desired lines while pressing the Ctrl key.
To release selection of a path or paths, use either of the following methods:
– To release all selected lines, click an empty line.
– To release the selection of one line, click the line while pressing the Ctrl key.
4. If you want to change the status of the selected path to online, click the Online button.
If you want to change the status to offline, click the Offline button. A dialog box
confirming that you want to change the status is displayed.