HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 143
4.3.6.2 Setting Up the Operating Environment
To set up the HDLM operating environment, execute the dlnkmgr command's set
operation. This operation allows you to set the following functions:
 Load balancing
 Path health checking
 Automatic failback
 Intermittent error monitoring
 LU dynamic deletion functionality
 Error log collection level
 Trace level
 Error log file size
 The number of error log files
 Trace file size
 The number of trace files
For details on how to set each function, see section
7.6.
For example, to set up the error log collection level, execute the dlnkmgr command's set
operation with the -ellv parameter specified. When the confirmation message is displayed,
enter y to execute, or n to cancel the command.
The following shows an example in which the command is executed:
>dlnkmgr set -ellv 1
KAPL01049-I Would you like to execute the operation? Operation name = set [y/n]: y
KAPL01001-I The HDLM command completed normally. Operation name = set, completion
time = yyyy
/mm/dd hh:mm:ss
>
To check whether the settings have been applied, perform the procedure described in
section
4.3.6.1.