HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 193
Placing the mouse pointer over these buttons displays a tool tip containing the
channel adapter port number.
For the Lightning 9900V Series, the tool tips for the buttons a to r of CL1 may
display 3a to 3r, and the tool tips for the buttons a to r of CL2 may display 4a to 4r.
– When using TagmaStore USP
This button displays the CHA port number. The CHA port button is displayed in the
minimized or the expanded mode for each CHA. Clicking the Minimize button or the
Expand button switches the mode for displaying the CHA ports. The following
explains the displays in the minimized mode and expanded mode.
– Display in the minimized mode
All the CHA ports belonging to a CHA (for example, CHA-1E) are integrated and
displayed as one label. The button displays the first CHA port number and the
last CHA port number, connected by a hyphen (-). For example, when a CHA
contains CHA ports from 1A to 7D, the CHA port button shows 1A-7D.
If the connected paths are disabled by selecting the Type or Status check boxes,
the CHA port button will also be disabled.
You cannot select a path by clicking an active CHA port button.
– Display in the expanded mode
Each CHA port belonging to a CHA (for example, CHA-1E) is displayed in a button
independently.
If the connected paths are disabled by selecting the Type or Status check boxes,
the corresponding CHA port button will also be disabled.
Clicking an active button selects all paths connected to the selected CHA port.
Expand button and Minimize button
These buttons are displayed only when using TagmaStore USP. The buttons switch the
mode for displaying the CHA ports of each CHA.
– Expand button (
)
The Expand button appears when the CHA ports are displayed in the minimized
mode. When you click this button, it changes to the Minimize button and all the CHA
port numbers belonging to the selected CHA appears. When you place the mouse
pointer on the Expand button, Expand is displayed in the tool tip.
– Minimize button (
)
The Minimize button appears when the CHA ports are displayed in the expanded
mode. When you click this button, it changes to the Expand button and one CHA port
number that integrates all the CHA ports belonging to the selected CHA appears.
When you place the mouse pointer on the Minimize button, Minimize is displayed in
the tool tip.
When there is already a CHA port in the expanded mode and you switch another CHA
port to the expanded mode, the first CHA port in the expanded mode is switched to the
minimized mode. Only one CHA can be in the expanded mode.
The Expand or Minimize button is always active, whether or not the path connected to
the CHA is displayed.