HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 223
KAPL01001-I The HDLM command completed normally. Operation name = online, completion
time = yyyy
/mm/dd hh:mm:ss
>
Reference
Using the view operation together with Windows commands enables you to filter the path
information listed for a specific HBA port or channel adapter port. For details about the
view operation, see section
7.7.
We recommend that you use the following command and verify the information on the
target paths before you execute the online operation to place online all paths connected
to a specific HBA port or channel adapter port.
The following example shows how to filter and display the information on all paths that pass
through the HBA port whose host port number is 0004 and bus number is 0001.
>dlnkmgr view -path | find "0004.0001"
The above commands will display information on all the paths that pass through the
specified HBA port.
The following example shows how to filter and display the information on all paths that pass
through the channel adapter port 0A of the Thunder 9500V Series.
>dlnkmgr view -path -stname | find "9500V" | find "0A"
The above commands will display information pertaining to only those paths that pass
through the specified channel adapter port.
Note: When the LU dynamic deletion functionality is used, a path might be deleted due to
an error such as a path error. In this case, when you attempt to change the path status, an
error occurs. Confirm that the path of which you attempt to change the status has been
deleted, and then take actions for the path error. For details, see section
4.6.2.