HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 233
Setting
Automatic
Failback
Intermittent
Error
Monitoring
Available Operation Result of Operation
2
Since automatic failback is off, intermittent error monitoring is disabled. The following example shows how to enable
monitoring of intermittent errors:
>dlnkmgr set -iem on -intvl 20 -iemnum 2
KAPL01049-I Would you like to execute the operation? Operation name = set [y/n]: y
KAPL01001-I The HDLM command completed normally. Operation name = set, completion time =
yyyy/mm/dd hh:mm:ss
>
Specify the -lic option when a license is updated. The HDLM license is provided by a
license key or a license key file. A license key file is a file that stores an HDLM license key. If
you use a license key file, store the license key file named hdlm license directly under the
Windows installation-destination, and then execute the set -lic operation. A message
confirming that the license key has been registered is displayed, depending on the license
key type described in the license key file. When a temporary license key or emergency
license key has been registered, the expiration period is displayed (KAPL01071-I,
KAPL01072-I).
If you do not use a license key file, when the set -lic operation is executed, a message
(KAPL01068-I) asking the user to enter a license key appears. Enter the license key. A
message confirming that the license key has been registered is displayed, depending on the
license key type described in the license key file. When a temporary license key or
emergency license key has been registered, the expiration period is displayed (KAPL01071-I,
KAPL01072-I).