HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 235
Table 7.7 shows the values of the LU dynamic deletion functionality.
Table 7.7 Values for LU Dynamic Deletion Functionality
Value Description
off The LU is not removed from HDLM-management even if the error occurs in all the paths to the LU, all the
paths to the LU are disconnected, or the LU is deleted. The status of the paths is Offline(E) and Online(E).
This operation is as equal as the operation in HDLM 5.1 or earlier. The
off option is recommended when
you want to use the same functionality as you use in HDLM 5.1 or earlier, without using the LU dynamic
deletion functionality.
on The LU is removed from HDLM-management when all the paths to the LU are disconnected. However, if
an Offline(C) path is included in the disconnected paths, the LU is not deleted from HDLM-management.
The deleted LU is restored when it is recovered from the physical failure and the disk is re-scanned.
on -force The LU is removed from HDLM management when all the paths to the LU are disconnected, even when
an Offline(C) path is included.
The removed LU is restored when it is recovered from the physical failure and the disk is re-scanned.
To execute the command without displaying the message asking for confirmation, use the –s
parameter. Specify this parameter if you want to skip the response to the confirmation
message: for example, when you want to execute the command in a shell script or batch
file.
To display the format of the set operation, use –help.