HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 239
7.7.2 Parameters
This section describes the parameters for the view operation.
7.7.2.1 Parameters Used for Displaying Program Information
To displays the HDLM program information, use -sys [-sfunc|-msrv|-adrv|-pdrv|-
lic]. Use one of the subsequent parameters (following -sys) to specify the program
information that you want to display. If you do not specify a subsequent parameter, the
command displays all program information.
Table 7.8 describes the specifiable parameters, displayed information, displayed items, and
a corresponding description.
Note: The –t parameter does not display the title for each information item.
Table 7.8 Displayed Program Information
Parameter and Program
Information
Item Description
HDLM Version HDLM version number
Service Pack
Version
HDLM SP version number. This item is blank if a SP is not
installed.
Load Balance Setting for load balancing
 Setting status
on: Enabled
off: Disabled
 Algorithm
When the setting status of load balancing is
on, the type of
algorithm used for load balancing is displayed after the
on.
rr: Round robin
extended rr: Extended round robin
Support Cluster Setting for cluster support*and the type of the cluster server
 on MSCS: when MSCS is used for the cluster server
 off: when no cluster is used or a cluster other than MSCS is
used
Elog Level Error logging level
 0: Collects no error information
 1: Collects error information at the Error level or higher
 2: Collects error information at the Warning level or higher
 3: Collects error information at the Information level or higher
 4: Collects error information at the Information or higher level
(including maintenance information)
Elog File Size (KB) Size of the error log file in kilobytes
-sfunc
Information about the
HDLM function settings
Number Of Elog
Files
Number of error log files