HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

242 Chapter 7 Command Reference
The following example shows how to display information about the HDLM function settings:
>dlnkmgr view -sys -sfunc
HDLM Version : xx-xx
Service Pack Version :
Load Balance : on(rr)
Support Cluster : off
Elog Level : 3
Elog File Size(KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : off
Remove LU : on
Intermittent Error Monitor : off
KAPL01001-I The HDLM command completed normally. Operation name = view, completion
time = yyyy
/mm/dd hh:mm:ss
>
The following example shows how to display information about the HDLM manager:
>dlnkmgr view -sys -msrv
HDLM Manager Ver WakeupTime
Alive xx
-xx yyyy/mm/dd hh:mm:ss
KAPL01001-I The HDLM command completed normally. Operation name = view, completion
time = yyyy
/mm/dd hh:mm:ss
>
The following example shows how to display information about the HDLM alert driver:
>dlnkmgr view -sys -adrv
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive xx
-xx yyyy/mm/dd hh:mm:ss 128
KAPL01001-I The HDLM command completed normally. Operation name = view, completion
time = yyyy
/mm/dd hh:mm:ss
>
The following example shows how to display information about the HDLM driver:
>dlnkmgr view -sys -pdrv
HDLM Driver Ver WakeupTime
Alive xx-xx yyyy/mm/dd hh:mm:ss
KAPL01001-I The HDLM command completed normally. Operation name = view, completion
time = yyyy
/mm/dd hh:mm:ss
>
The following example shows how to display information about the HDLM license:
>dlnkmgr view -sys -lic
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name = view, completion
time = yyyy
/mm/dd hh:mm:ss
>