HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 243
7.7.2.2 Parameters Used for Displaying HDLM Management-Target Device Information
Use the –stinfo parameter to display information about a HDLM management-target
device (except the Thunder 9200/9500V Series, Lightning 9900/9900V Series, TagmaStore,
and Universal Storage Platform V) that was set when HDLM was installed.
Table 7.9 describes the displayed items.
Table 7.9 HDLM Management-Target Device Information
Item Description
HDLM management-
target device
Name of the HDLM management-target device (except the Thunder 9200/9500V Series,
Lightning 9900/9900V Series TagmaStore, and Universal Storage Platform V)
Setting Status Setting status of the HDLM management-target device (except the Thunder 9200/9500V
Series, Lightning 9900/9900V Series, TagmaStore, and Universal Storage Platform V).
on: enabled
off: disabled
The HDLM management-target device (except the Thunder 9200/9500V Series, Lightning
9900/9900V Series, TagmaStore, and Universal Storage Platform V) can be set when the
operating system is one of the following. Otherwise, this item always displays off.
 Windows Server 2003 (IA32) SP1 or later
 Windows Server 2003 (IPF) SP1 or later
The –t parameter does not display the title for each information item.
Example:
>dlnkmgr view -stinfo
EMC Symmetrix DMX Series, CLARiiON CX Series : on
HP StorageWorks EVA Series : on
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time =
yyyy/mm/dd hh:mm:ss
>