HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 263
Parameters for Displaying a Summary of LU Information by Adding Items to be Displayed
In the -lu -c –item parameter, the items specified with the -item option are added to
the items to be displayed by the -lu -c option and displayed. If no value is specified for
the -item parameter, all the items that can be added are displayed. See
Table 7.15 for the
contents of each displayed item.
The SLPR parameter can be added by using the -item parameter, and the slpr parameter
can be specified after the -item parameter.
The subsequent sub-parameter is –exlu. When an HDLM management-target device
contains the EMC DMX series, EMC CX series, or HP EVA series. If this parameter is specified,
the entire 32 digits of the iLU are displayed without truncating it to 13 digits. If this
parameter is not specified, the iLU of the EMC DMX series, EMC CX series, and HP EVA series
is displayed as 16 digits with the 14
th
to 16
th
digits displayed as periods (...). When an HDLM
management-target device is configured of only the Thunder 9200/9500V Series, Lightning
9900/9900V Series, TagmaStore, or Universal Storage Platform V,16 digits are displayed for
the iLU even if this parameter is specified.
The –t parameter does not display the title for each information item.
The following example describes how to add and display a summary of SLPR.