HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 275
Collected Files
1
Folder Files Explanation
dlmmgr-path.txt Result of the dlnkmgr view -path -exlu
command
dlmmgr-path-iem.txt Result of the dlnkmgr view -path -
iem command
dlmmgr-sys.txt Result of the dlnkmgr view -sys
command
evApplication.evt
evApplication.log
Event log for applications
evSecurity.evt
evSecurity.log
Event log for security
evSystem.evt
evSystem.log
Event log for the system
HBA-reg.txt Registry setting information of HBA
hdlmdsm-status.txt Filter driver information
hntrlib-reg.txt Contents of the HNTRLib registry
iscsi-reg.txt iscsi registry information
mpio-list.txt MPIO information
mpio-reg.txt MPIO registry information
winmsd.txt Windows system information
folder-to-which-collected-
information-is-
output\hbsainfo
All files under hbsainfo
8
Error information of a HiCommand product
other than HDLM
1
The target error information collection folder is created in the folder to which collected information is output. The user specifies
the folder to which collected information is output when executing
DLMgetras. The default of folder-to-which-collected-
information-is-output when the DLMgetras utility is executed from the Windows Start menu is
Windows-installation-
destination-drive-name\hdlmtemp\hdlmgetras_
nn. nn is a number from 00 to 99. You can change the Windows-
installation-destination-drive-name\hdlmtemp
portion by changing the target in the DLMGetras properties.
2
The underlined part indicates the folder specified during installation.
3
The value N depends on the setting in the dlmwebagent.properties file. The default value is 2.
4
M.N indicates the VxVM version. For example, 4.1 indicates Veritas Volume Manager 4.1. The applicable version is either 2.7,
3.0, 3.1, 4.0, 4.1, 4.2, or 4.3.
5
In the Windows Server 2003 (IPF and x64), replace this part with Program Files (x86).
6
In the actual file name, a file number is appended to Integrated-trace-file-prefix specified-in-the-
Hitachi-Network-Objectplaza-Trace-Library-utility2
. For example, the default will be hntr21.log to
hntr216.log. Note that the 2 following the integrated trace file prefix does not represent a file number.
7
You can obtain dlm_iscsims.txt only when the iSCSI software was installed.
8
You can obtain all files under hbsainfo only when the HiCommand product other than HDLM from which error information is
to be collected is being used.