HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 289
Chapter 9 Messages
This chapter describes the format and meaning of message IDs, terms used in messages and
in message explanations, HDLM messages, and appropriate actions to take in response to the
messages. Section
9.16 describes the meanings and actions to be taken of return codes
output by HDLM when the HDLM remote access interface sends a request to HDLM.
 Before viewing the list of messages (see section 9.1)
 HDLM command messages (see section 9.2)
 HDLM GUI messages (see section 9.3)
 HDLM API messages (see section 9.4)
 HDLM manager messages (see section 9.5)
 HDLM driver (Filter Component) messages (see section 9.6)
 HDLM driver (Core Logic Component) messages (see section 9.7)
 HDLM management target messages (see section 9.8)
 HDLM installation program messages (see section 9.9)
 Messages from the DLMgetras utility (see section 9.10)
 Messages from the dlmpr utility (see section 9.11)
 Messages from the HDLM remote access interface (see section 9.12)
 Messages from the dlmprsvkey utility (see section 9.13)
 Messages from the HDLM Performance Monitor (see section 9.14)
 Messages from the dlmchkpath utility (see section 9.15)
 Return Codes for the HDLM remote access Interface (see section 9.16)