HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 299
Message ID Message Details and Actions
KAPL01055-I All the paths which pass the specified aa...aa
will be changed to the Offline(C) status. Is this
OK? [y/n]:
Details
Multiple paths will be collectively placed
Offline(C) because the
-hba or -cha
parameter was specified. To collectively place
multiple paths Offline(C), enter y. To not
collectively place them Offline(C), enter
n.
aa...aa: cha port or hba
Action
If you want to execute the offline processing for
the paths that pass the specified target, enter
y.
If you want to terminate the processing, enter
n.
KAPL01056-I If you are sure that there would be no problem
when all the paths which pass the specified
aa...aa are placed in the Offline(C) status,
enter y. Otherwise, enter n. [y/n]:
Details
This message re-asks the user whether to place
all the paths Offline(C). To place all the paths
Offline(C), enter
y. To not place them
Offline(C), enter
n.
aa...aa: cha port or hba
Action
If you want to execute the offline processing for
the paths that pass the specified target, enter
y.
If you want to terminate the processing, enter
n.
KAPL01057-I All the paths which pass the specified aa...aa
will be changed to the Online status. Is this OK?
[y/n]:
Details
Multiple paths will be collectively placed Online
because the
-hba or -cha parameter has
been specified. To continue processing, enter
y. To cancel processing, enter n.
aa...aa: cha port or hba
Action
If you want to execute the online processing for
the paths that pass the specified target, enter
y.
If you want to terminate the processing, enter
n.
KAPL01058-W The specified parameter value is not needed.
Operation name =
aa...aa, parameter =
bb...bb, parameter value = cc...cc
Details
A parameter value was specified in a parameter
that does not need any parameter value.
aa...aa: clear, offline, online, set,
view
bb...bb
: Parameter name
cc...cc: Parameter value
Action
Execute
help operation-name of the HDLM
command (
dlnkmgr) to check the parameter
and parameter value, and then retry. For details
on the
help operation, see section 7.3.