HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 301
Message ID Message Details and Actions
KAPL01062-I aa...aa path(s) were successfully placed
Offline(C). The offline request of
bb...bb
path(s) were registered;
cc...cc path(s) were
not. Operation name =
dd...dd
Details
This message indicates the number of paths
that were processing when the offline request
was registered during Reserve processing.
aa...aa: Number of paths where offline is
successful (decimal number)
bb...bb: Number of paths for which offline
was reserved (decimal number)
cc...cc: Number of paths where offline is
unsuccessful (decimal number)
dd...dd: offline
Action
For batch registered paths, execute the
view
operation to check the registered path(s).
For details on the
view operation, see section
7.7.
KAPL01063-I The target path(s) are already aa...aa. Details
As a result of executing the
online/offline
operation, the specified path is already placed
Online/Offline(C).
aa...aa: Online or Offline(C)
Action
Use the
view operation of the HDLM command
(
dlnkmgr) to check the status of the path. For
details on the
view operation, see section 7.7.
For details on the
online operation, see
section
7.5. For details on the offline
operation, see section
7.4.
KAPL01064-W The information for the specified host device
could not be acquired. Operation name =
aa...aa
Details
The host device specified in
view -path -
hdev
cannot currently be accessed.
aa...aa: view
Action
 If the specified host device is being formatted,
retry after formatting finishes.
 If all the paths to the specified host device
contain an error, recover the path error, and
then retry.
 In a cluster configuration, if the LU existing for
the specified host device is exclusively used
from another host, or if the specified host device
is allocated for a dynamic disk volume, you
cannot view the path information by specifying
the host device name. Re-execute the
dlnkmgr command's view operation without
specifying the host device name.