HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 307
9.3 HDLM GUI Messages
Message ID Message Details and Actions
KAPL02001-I HDLM GUI has started normally. Action
None.
KAPL02002-I HDLM GUI has terminated. Action
None.
KAPL02003-E You lack permission to start HDLM GUI. Action
Execute the command as a user with
administrators group privileges.
KAPL02004-E An error occurred during internal processing of
HDLM GUI. HDLM GUI cannot start. Details =
aa...aa
Details
During GUI startup, an error that might not be
caused by a user operation occurred.
aa...aa: Failed API name:
 JHSPGetPathBy
 JHSPGetManagerStatus
 JHSPGetDriverStatus
 JHSPGetADriverStatus
 JHSPVerifyAuthorization
Action
Execute the
DLMgetras utility for collecting
HDLM error information, and then contact your
HDLM vendor or the maintenance company if
there is a maintenance contract for HDLM. For
details on the
DLMgetras utility, see section
8.2.
KAPL02005-E An attempt to start HDLM GUI has failed due to
insufficient memory.
Details
Sufficient memory to process the HDLM GUI
could not be obtained.
Action
Terminate unnecessary applications to increase
the amount of free memory, or restart the host.
KAPL02006-W No path was detected. Details
The target path could not found.
Action
Set up a path between the host and storage
system, and then restart the host.