HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 315
Message ID Message Details and Actions
KAPL02041-W The cluster support function is active, so the
load balancing function is not supported.
Details
The load balancing function cannot be enabled
because MSCS is installed.
Action
The load balancing function is not supported in
an environment where MSCS is installed. If you
want to use the load balancing function,
uninstall MSCS.
KAPL02042-E An unexpected error occurred. The HDLM GUI
cannot start.
Details
An exception occurred when starting the HDLM
GUI.
Action
Execute the
DLMgetras utility for collecting
HDLM error information, and then contact your
HDLM vendor or the maintenance company if
there is a maintenance contract for HDLM. For
details on the
DLMgetras utility, see section
8.2.
KAPL02043-E The target path of the aa...aa operation
could not be found. PathID =
bb...bb
Details
The target path of the operation could not be
found.
aa...aa: Online or Offline
bb...bb: The Path ID to which the operation
was attempted (decimal number)
Action
Click Refresh to update the view contents, and
then check the path status, and then retry.
KAPL02044-W aa...aa exists already. Do you want to
overwrite it? [OK/Cancel]
Details
The existing file will be overwritten. To
continue, click OK. Otherwise, click Cancel.
aa...aa: File name
Action
To overwrite the existing file, click OK.
Otherwise, click Cancel.
KAPL02052-W The HDLM manager could not be connected. Details
The HDLM manager could not be accessed
during the start processing of the HDLM GUI.
aa...aa: Get Option Information or Set Option
Information
Action
Execute the
view operation of the HDLM
command (
dlnkmgr) to check whether the
HDLM manager has started. If the HDLM
manager has not started, start the HDLM
manager and then restart HDLM GUI. For
details on the
view operation, see section 7.7.
KAPL02053-I Would you like to terminate the HDLM GUI?
[OK/Cancel]
Action
If you want to terminate the HDLM GUI, click
OK. If you do not want to terminate the HDLM
GUI, click Cancel.