HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 317
Message ID Message Details and Actions
KAPL02063-W The version number cannot be displayed. Details
The version number couldn't be acquired
because it failed in reading of a parameter file
to start HDLM GUI.
Action
The version number cannot be displayed, but
the operation of HDLM GUI can execute. If you
want to display the version number, install the
HDLM again.
KAPL02064-W The error monitoring interval and the number of
times that the error is to occur conflict with the
automatic failback checking interval.
Details
An intermittent error cannot be detected by
using the values specified for the following: the
checking interval for automatic failback, the
error monitoring interval, and the number of
times the error is to occur.
Action
Set the intermittent error monitoring interval to a
value that is equal to or more than (automatic-
failback-checking-interval x number-of-times-
error-is-to-occur-for-intermittent-error-
monitoring).
KAPL02065-W The getting PathInformation has been stopped
because the configuration of paths was
changed during the processing of the getting
PathInformation.
Details
The path information could not be get because
the configuration of the path was changed
when getting the latest path information after
the Offline, Online, or Clear Data.
Action
Click Refresh after you confirm the
reconfiguration of the path is not done.
KAPL02076-W An attempt to acquire the HDLM version
information failed. Details =
aa...aa
Details
The HDLM version information could not be
acquired correctly.
aa...aa: Code showing reason for error
Action
Re-execute. If the same error occurs even after
removing the reservation, execute the
DLMgetras utility for collecting HDLM error
information to collect the error information, and
then contact your HDLM vendor or
maintenance company if there is a
maintenance contract for HDLM.
KAPL02077-W An attempt to acquire the Service Pack version
information failed. Details =
aa...aa
Details
aa...aa: Code showing reason for error
Action
Re-execute. If the same error occurs even after
removing the reservation, execute the
DLMgetras utility for collecting HDLM error
information to collect the error information, and
then contact your HDLM vendor or
maintenance company if there is a
maintenance contract for HDLM.