HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 321
9.5 HDLM Manager Messages
Message ID Message Details and Actions
KAPL04001-I HDLM manager started. Action
None.
KAPL04002-E Could not start the HDLM manager. Details
HDLM manager failed to start because the
environment is incorrect for the manager to run
properly.
Action
Execute the
DLMgetras utility for collecting
HDLM error information, and then contact your
HDLM vendor or the maintenance company if
there is a maintenance contract for HDLM. For
details on the DLMgetras utility, see section 8.2.
KAPL04003-E The startup parameter is invalid. Details
The parameter held internally by the HDLM
manager is incorrect.
Action
Execute the
DLMgetras utility for collecting
HDLM error information, and then contact your
HDLM vendor or the maintenance company if
there is a maintenance contract for HDLM. For
details on the
DLMgetras utility, see section 8.2.
KAPL04004-I HDLM manager will now terminate. Action
None.
KAPL04005-E Cannot connect the service control manager. Details
HDLM manager cannot start normally (unable to
connect the service control manager).
Action
The HDLM manager starts as a service. To start
HDLM from the command line, use the net start
DLMManager command.
KAPL04006-E Cannot register the service control handler
function. Return value =
aa...aa
Details
HDLM manager cannot start normally (unable to
register the service control handler function).
aa...aa: operating system error code
Action
Contact your HDLM vendor or the maintenance
company if there is a maintenance contract for
HDLM.
KAPL04007-E Cannot register the service status. Return
value =
aa...aa
Details
HDLM manager cannot start normally (unable to
register the service status).
aa...aa: operating system error code
Action
Contact your HDLM vendor or the maintenance
company if there is a maintenance contract for
HDLM.