HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 329
Message ID Message Details and Actions
KAPL05014-I The device object (aa...aa) was registered
as the path (
bb...bb).
Details
The path (bb...bb: Core logic path identifier
(hexadecimal number)) of the device object
(
aa...aa: Filter driver management table
address (hexadecimal number)) was successfully
registered in the core logic.
Action
None.
KAPL05018-W The FO processing in the path (aa...aa)
failed. (
bb...bb:cc...cc)
Details
There is no path where FO processing is to be
performed. Path (
aa...aa: Path ID of the path
where I/O processing was performed for the first
time (hexadecimal number)), (
bb...bb: Failure
code (hexadecimal number),
cc...cc:
Identification value for internal processing (0 or
1))
Action
The I/O being processed is discarded. Check the
status of the device path and take an appropriate
action.
KAPL05031-W Disk(aa...aa) is not a target disk system for
HDLM.(
bb...bb,cc...cc)
Details
The disk (aa...aa: Partition sequence number
(decimal number)) is not a CoreLogic
management-target disk. (
bb...bb: Degree of
progress in disk recognition processing
(hexadecimal number), cc...cc: Execution
result of the disk confirmation command for disk
recognition processing (hexadecimal number))
Action
If this message is displayed for a disk that is not
supported by HDLM, there is no problem.
If this message is displayed for a disk that is
supported by HDLM, contact your HDLM vendor
or the maintenance company if there is a
maintenance contract for HDLM.
KAPL05032-I The path health checking for the path
(
aa...aa) completed normally.
(
bb...bb,cc...cc)
Details
aa...aa: Path ID (hexadecimal number)
bb...bb: Disk sequence number (decimal
number)
cc...cc: Degree of progress in health checking
(hexadecimal number)
Action
None.