HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

334 Chapter 9 Messages
9.8 HDLM Management Target Messages
Message ID Message Details and Actions
KAPL08019-E The path (aa...aa) detected an error
(
bb...bb). (cc...cc)
Details
An error occurred in the path because of a
condition such as a disconnection.
aa...aa: Path identifier (hexadecimal number)
bb...bb: Error code (hexadecimal number)
 When a path error was detected by path health
checking or an
online operation
0x000F0000(Fixed) is displayed.
 When the path error was detected through an I/O
error
The OS error code is displayed.
cc...cc: Address of the filter driver in which the
error occurred (character string)
Action
Check the path in which the error was detected.
KAPL08022-E A path error occurred. ErrorCode =
aa...aa, PathID = bb...bb, PathName =
cc...cc.dd...dd.ee...ee.ff...ff,
DNum =
gg...gg, HDevName = hh...hh
Details
A physical or logical error occurred in the path.
aa...aa: operating system error code
(hexadecimal number)
 When a path error was detected by path health
checking or an
online operation
0x000F0000(Fixed) is displayed.
 When the path error was detected through an I/O
error
The OS error code is displayed.
bb...bb: Path ID (same as PathID of view -
path
) (decimal number)
cc...cc: Host port number (same as PathName
of
view -path) (hexadecimal number)
dd...dd: Bus number (hexadecimal number)
ee...ee: Target ID (hexadecimal number)
ff...ff: HLU number (same as PathName of
view -path) (hexadecimal number)
gg...gg: Dev number (same as DNum of view -
path
) (decimal number)
hh...hh: Host device name
Action
The path may have a problem. For details on the
action to be taken, see section
5.3 and switch the
path shown in the message to Online.