PoE/PoE+ Planning and Implementation Guide 2011-09

1-27
Introduction
HP ProCurve PoE and PoE+ Modules
HP ProCurve 24-Port 10/100 PoE+ zl Module
The HP ProCurve Switch zl PoE/PoE+ 24-port module (J9478A) is for the HP
E5400zl/E8200zl switches and has 24 PoE/PoE+ auto-sensing 10/100-TX RJ-45
ports capable of providing PoE/PoE+ power.
HP 24-Port Gig PoE+ v2 zl Module
HP Switch 24 port Gig PoE+ v2 zl Module (J9534A) is for the HP E5400zl/
E8200zl switches and has 24 twisted-pair ports with RJ-45 connectors for 10/
100/1000Base-T operation over Category 5 or better 100-ohm UTP or STP cable
(category 5e recommended for Gigabit). All ports have the IEEE 802.3ab Auto
MDI/MDI-X (HP Auto-MDIX) feature and support IEEE 802.3at PoE+.
HP 20-Port Gig-T PoE+ / 4-Port SFP v2 zl Module
HP Switch 20 port Gig-T PoE+ & 4 port Gig SFP v2 zl Module (J9535A) is for
the HP E5400zl/E8200zl switches and has 20 twisted-pair ports with RJ-45
connectors for 10/100/1000Base-T ports that support PoE+ and 4 ports for
installing any of the supported HP mini-GBICs or SFPs. All RJ-45 ports have
the IEEE 802.3ab Auto MDI/MDI-X (HP Auto-MDIX) feature and support
PoE+. The mini-GBIC/SFP ports do not support IEEE 802.3at PoE+.