PoE/PoE+ Planning and Implementation Guide 2011-09
1-30
Introduction
Quick Reference Table
2610-24-PWR 10/100 24
24 @ 15.4 watts
4 J8168A
J8169A
406 watts available to
ports 1-24 (provided by the
internal source). 408/204
4
watts available, provided
by the EPS source.
2610-48-PWR 10/100 48
48 @ 15.4 watts
4 J8168A
J8169A
406 watts available to
ports 1-24 (provided by the
internal source). 408/204
4
watts available to ports
25-48 (provided by the EPS
source).
2615-8-PoE 10/100 4 @ 15.4 watts
8 @ 7.5 watts
2
2
J9565A 67 watts available to ports
1-8 (provided by the
internal source).
E2620-24-PPoE+
10/100/1000
24
4 @ 30 watts
8 @ 15.4
12 @ 7.5 watts
2 N/A 126 watts internal only
E2620-24-PoE+
10/100/1000
24
24 @ 30 watts
2 J9443A 382 watts available to
ports 1-24 (provided by the
internal source). 388 watts
available as backup in
case of failure, provided
by the external source.
E2620-48-PoE+
10/100/1000
48
24 @ 30 watts
5
48 @ 15 watts
4 J9443A 382 watts available to
ports 1-48 (provided by the
internal source). 388 watts
available as backup in
case of failure, provided
by the external source.
2910al-24G-PoE
10/100/1000
24
24 @ 30 watts
5
4
2
J9146A
382 watts available to ports 1-
24 (provided by the internal
source).
2910al-48G-PoE 10/100/1000 48
24 @ 30 watts
5
48 @ 15 watts
4
2
J9148A 382 watts available to ports 1-
48 (provided by the internal
source).
Model/
Device
Port Type Port Count/
PoE watts per
port
1
Gig Uplink
Ports
RPS/EPS Maximum Power Internal
and External
Power
Fault
Locator
Console
Spd mode: off = 10 Mbps
2 flash = 100 Mbps
on = 1 Gbps
3 flash = 10 Gbps
*
LED
Mode
Clear
Reset
PoE+ Integrated 10/100/1000Base-T Ports (1 - 24T) Ports are Auto-MDIX
Test
Tm
p
Status
Dual-Personality Ports: 10/100/1000-T (T) or SFP (S)
!
Use only one (T or S) for each Port
PoE
Fan
21
S
23
S
22
S
24
S
FDx
Spd
PoE
Act
*
14
16
19
17
15
13
18
20
Link Mode
23
T
21
T
22
T
24
T
Link
Mode
Status of the Back
Mdl RP
S
EPS
ProCurve Switch
2910bl-24G-PoE
J9146A
Link Mode
Link Mode
12
10864
2
1197531
Link Mode
Link
Mode
Usr
Auxiliary Port
PoE+
Power
Fault
Locator
Console
LED
Mode
Clear
Reset
PoE+ Integrated 10/100/1000Base-T Ports (1 - 48T) Ports are Auto-MDIX
Test
Tm
p
Status
Dual-Personality Ports: 10/100/1000-T (T) or SFP (S)
!
Use only one (T or S) for each Port
PoE
Fan
45
S
47
S
46
S
48
S
*
Spd mode: off=10 Mbps, 2 flash=100 Mbps, on=1 Gbps, 3 flash=10 Gbps
FDx
Spd
PoE
Act
*
38
40
43
41
39
37
12
10
864
2
119
75
3
1
42
44
Link
Mode
Link Mode
Link
Mode
47
T
45
T
46
T
48
T
Link
Mode
Status of the Back
Mdl RP
SEPS
ProCurve Switch
2910bl-48G-PoE
J9148A
Link Mode
Link Mode
24
222018
16
14
232119171513
Link Mode
Link
Mode
36
34323028
26
353331292725
Link Mode
Link
Mode
Usr
PoE+