Read Me First for zl Modules K.11.00 or greater

ManualsBrandsHP ManualsComputer AccessoriesHP 100/1000-T xl Module

Read Me First

for the ProCurve Switch zl Modules

Premium Edge Switch Features

The ProCurve 5400zl switch ships with the ProCurve Intelligent Edge software feature set. Additional Premium

Edge switch software features for this switch can be acquired by purchasing a Premium Edge license and

installing it on the Intelligent Edge version of this switch. The part number for the 5400zl Premium Edge license

is J8994A.

For the most current information about the features included in the Premium Edge package, refer to the release

notes for your switch on the ProCurve Networking Web site at http://www.procurve.com. (Click on Technical

support, then Product manuals, then ProCurve Switch 5400zl Series.) The Premium Edge license is available from

your ProCurve reseller.

On the 8200zl, the Premium Edge Switch Features are pre-enabled.

Module Description Series 5400zl Base

Software Release

Series 8200zl Base

Software Release

J8702A zl 24 port Gig-T PoE Module K.11.00 or greater K.12.xx or greater

J8705A zl 20 port Gig-T + 4 Port mGBIC Module K.11.00 or greater K.12.xx or greater

J8706A zl 24 port mini-GBIC Module K.11.3x or greater K.12.xx or greater

J8707A zl 4 port 10-GbE X2 Module K.11.00 or greater K.12.xx or greater

J8708A zl 4 port 10-GbE CX4 Module K.11.3x or greater K.12.xx or greater

J8726A 5400zl Management Module K.11.00 or greater N/A

J9051A zl Wireless Edge Services Module K.12.xx or greater K.12.xx or greater

J9052A zl Redundant Wireless Edge Services Module K.12.xx or greater K.12.xx or greater

J9092A 8200zl Management Module N/A K.12.xx or greater

J9093A 8200zl Fabric Module N/A K.12.xx or greater

J9095A 8200zl System Support Module N/A K.12.xx or greater

The Base Software Release is installed on the switch at the factory.

For installation information refer to the ProCurve Switch zl Modules Installation Guide, that came

with your zl modules.

Summary of content (4 pages)

PAGE 1
Read Me First for the ProCurve Switch zl Modules Module Description Series 5400zl Base Software Release Series 8200zl Base Software Release J8702A zl 24 port Gig-T PoE Module K.11.00 or greater K.12.xx or greater J8705A zl 20 port Gig-T + 4 Port mGBIC Module K.11.00 or greater K.12.xx or greater J8706A zl 24 port mini-GBIC Module K.11.3x or greater K.12.xx or greater J8707A zl 4 port 10-GbE X2 Module K.11.00 or greater K.12.xx or greater J8708A zl 4 port 10-GbE CX4 Module K.11.
PAGE 2
Note You can install, exchange, or remove modules after the switch has been powered on, except for the J9095A System Support Module. Removing this module with the switch powered on will cause the switch to shut down. The same is true for the J9092A Management Module unless there are two of them installed in the switch. Whenever a module is installed during this process, it is initialized and tested for correct operation. During this process, the switch Self Test LED is on.
PAGE 3
To Download New Software. Your ProCurve Series 8200zl Switches support several different methods for downloading new operating system software. For instructions on how to download the new software, please see appendix A, “File Transfers” in the Management and Configuration Guide .
PAGE 4
Mini-GBIC Operation Notes Revision “B” mini-GBICs only. This product requires ProCurve revision “B” or later mini-GBICs (product number ends with the letter “B”, for example J4858B, J4859B). These switches do not support revision “A” miniGBICs. Use only genuine ProCurve mini-GBICs. Non-ProCurve mini-GBICs are not supported. Use of genuine products ensures that your network maintains optimal performance and reliability.