Medical Archive Solutions User Guide

HPMA User Guide

164

HP Medical Archive

LDR Configuration

The Local Distribution Router (LDR) supports the standard service

settings to change the labeling of the service and add notations. It also

offers settings to control the state of the storage and protocol compo-

nents. The full set of configurable settings is shown below.

LDR Components

In addition to the standard service settings, the LDR also supports the

following components:

• Storage

• DICOM

• HTTP

• Connectivity

Table 64: LDR Service Configuration Settings

Prompt Type Description

LDR State Pull-down

Sets the service state:

• Online—normal operation

Storage State Pull-down

This is a duplicate of the setting on the component’s

main configuration settings. See page 165.

DICOM State Pull-down

This is a duplicate of the setting on the component’s

main configuration settings. See page 166.

HTTP State Pull-down

This is a duplicate of the setting on the component’s

main configuration settings. See page 167.

User Label String This string is the identification tag that appears in the

Navigation Tree, map views, and as the heading in

the Content frame for this service on this node.

Notes Text Free form notes allowing you to add descriptive text

related to this service on this node. These notes

appear in the Node Information section of the

Overview page.