Medical Archive Solutions User Guide

165
HP Medical Archive
Configuration
Storage
This component provides data on the object storage space and the
objects processed. The Storage component tracks the total amount of
object storage space being used and the space available.
The configuration settings allow you to set the active state of the
storage component, force the storage to read-only on restart, and reset
the “OCOR” alarm.
Table 65: LDR
X Storage Component Configuration Settings
Prompt Type Description
Storage State Pull-down
menu
Sets the component to be:
• Standby— When Storage is taken offline
(standby), the DICOM and HTTP interfaces are
forced into Redirect state and no replications are
made to or from the storage node.
• Online (Read-Only)—tells the grid this service is
not accepting new content. If DICOM or HTTP
components are Online, they are forced to
Online (Read-Only) state.
• Online—normal operation
Storage Read-Only
on Startup
Check box Sets the storage component to be read-only when the
component is restarted. Otherwise the state is set by
the service based on the available object storage
space. If space is low, the component uses
Online (Read-Only), otherwise it is Online.
You can use this setting to force the storage to read-
only even when there is ample available space. This
can be useful for troubleshooting.
Reset Corrupt
Objects Count
Check box When selected and applied, the counter attribute for
“Corrupt Objects Detected” is reset to zero. This
clears the “OCOR” alarm.