Medical Archive Solutions User Guide

HPMA User Guide
204
HP Medical Archive
waiting for the display to “catch up” may result in activating the
wrong command.
Initiating an Action
To initiate an action:
1. Press the <Tab> key to cycle the highlight to the desired control
button. Each press cycles to the next button in a standard rotation.
2. Press <Enter> to indicate that you want to initiate the selected
action.
A confirmation dialog opens allowing you to confirm or cancel the
action.
3. Use the <Tab> key to select OK (confirming the action) or Cancel.
A highlight box is used to show the current selection.
4. Press <Enter> to complete the input, either initiating the action or
cancelling it.
The dialog closes and Server Manager returns to normal operation,
either executing the action (OK) or waiting for another command
button selection (Cancel).
Command Operations
Monitoring Services
While running normally, the Server Manager is constantly monitoring
the services (at ten second intervals). If a service is taken offline or
fails, the Server Manager attempts to restart it.
Attempts to restart a stopped service are persistent; that is, as long as
the service is not running, the Server Manager continues to issue
restarts indefinitely.
An error state in a running service is handled differently than an
offline service. Server Manager attempts to restart the service up to
three times. If it remains in an error state, Server Manager continues to
monitor the service but does not persist in automatic restart attempts.