Medical Archive Solutions User Guide

81
HP Medical Archive
Services and Components
If an incoming IP address is included in more than one range, the device is
matched to the first occurrence from the top of the table downward.
The protocols supported for entities connecting from an address in the
range are indicated by check boxes.
Table 21: CMN
X IP Ranges Component Attributes
Attribute Type / Units Description
C T Alarm
Allowable IP Ranges
IP Range
Name
Text User-defined label assigned to the
IP range, usually a location or
workgroup.
N/A
IP Range Dotted decimal
or CIDR
Range of remote IP addresses
(inclusive) from which the grid
accepts TCP/IP connections.
N/A
Location Text Case sensitive reference to an
entry in the Locations table below.
N/A
DICOM Check box Indicates if DICOM protocol is
supported for devices in this IP
range.
N/A
HTTP Check box Indicates if HTTP is supported for
devices in this IP range.
N/A
Locations
Location Text User-defined name for a location
definition; this is referenced in the
IP Ranges table.
N/A
X Coordinate Meters This is not used in the HP Medical
Archive; leave blank.
N/A
Y Coordinate Meters N/A
Z Coordinate Meters N/A
Group ID Number This is not used in the HP Medical
Archive; leave blank.
N/A