xl Modules Installation Guide 2007-12

17
ProCurve Switch xl Modules
Installing the Modules
ProCurve Switch PoE xl Module Configurations
For the ProCurve Switch PoE xl Module to function it must be installed in any
slot of a ProCurve Switch 5300xl. The module will receive it’s operational
power from the switch and it’s PoE power from the 600 RPS/EPS or the 610
EPS.
The following examples show some possible configurations. The PoE power
available to a PoE xl module depends on how many devices are connected to
the EPS ports of the 600 RPS/EPS or the 610 EPS. In Configuration A, there
are 408 watts available for the one module to distribute to attached devices;
in Configuration B, there are 204 watts available to each module to distribute;
in Configuration C, there are 408 watts available to each module; and in
Configuration D, there are 204 watts available to each module. (See PoE
Power Requirements page 18). For more information, refer to the ProCurve
PoE Planning and Implementation Guide.
Figure 14. EPS configurations with the 600 RPS/EPS
Configuration A: EPS Powering a Single
module
Configuration B: EPS Powering two
modules
hp procurve
PoE
xl module
J8161A
xl
module
PoE
Link
Mode
1
2
3
4
56
PoE-Ready 10/100-TX Ports (1-24)  all ports are HP Auto-MDIX
13
14
20
19121110
9
8
7
15
21
16
22 23 24
17 18
Std
PoE
PoE
EPS
Status
LED Mode
Mode
Link
hp procurve
PoE
xl module
J8161A
xl
module
PoE
Link
Mode
1
2
3
4
56
PoE-Ready 10/100-TX Ports (1-24)  all ports are HP Auto-MDIX
13
14
20
19121110
9
8
7
15
21
16
22 23 24
17 18
Std
PoE
PoE
EPS
Status
LED Mode
Mode
Link
hp procurve
PoE
xl module
J8161A
xl
module
PoE
Link
Mode
1
2
3
4
56
PoE-Ready 10/100-TX Ports (1-24)  all ports are HP Auto-MDIX
13
14
20
19121110
9
8
7
15
21
16
22 23 24
17 18
Std
PoE
PoE
EPS
Status
LED Mode
Mode
Link