xl Modules Installation Guide 2007-12

4
ProCurve Switch xl Modules
Features
Features
Figure 1. Example 24-Port 10/100-TX xl Module
ProCurve Switch xl
1-Port 10-GbE Module
(J8988A)
6
1 port for installing any of the
supported ProCurve 10 Gig X2
transceivers.**
**Supported transceivers: The following ProCurve transceivers are supported by the J8988A xl Module (as of this
printing):
• ProCurve 10-GbE X2-SC SR Optic (J8436A)
• ProCurve 10-GbE X2-SC LR Optic (J8437A)
• ProCurve 10-GbE X2-SC ER Optic (J8438A)
• ProCurve 10-GbE X2 CX4 Xcvr (J8440B)
• ProCurve 10-GbE CX4 Optical Media Converter (J8439A)
1
This module requires switch software version E.07.01 or later to be installed in the switch.
2
This module requires switch software version E.08.20 or later to be installed in the switch.
3
This module requires switch software version E.08.42 or later to be installed in the switch.
4
This module requires switch software version E.09.22 or later to be installed in the switch.
5
This module requires switch software version E.10.30 or later to be installed in the switch.
6
This module requires switch software version E.11.xx or later to be installed in the switch.
Contact your ProCurve authorized networking products reseller or your ProCurve representative for information on
possible availability of other modules and mini-GBICs. You can also visit the ProCurve Networking products Web site
www.procurve.com to get more information.
Module Description
hp procurve
10
/ 100 -TX
xl module
J4820A
xl
module
retaining screw
network ports
Link and Mode LEDs
(one pair per port)