CM Professional Series Color Printer - (English) Network Guide

6.4 Configuring the JetDirect Print Server Port to Connect to the NetWare 4.11 Bindery

Network

This procedure allows you set up the HP JetDirect port on the NetWare 4.11 Bindery Network.

Step 1 - Install HP JetAdmin

1. Insert the HP JetDirect CD-ROM into the CD-ROM drive. If the installation program

does not run automatically, access the File Manager or Explorer and run SETUP.EXE

that is on the CD-ROM.

2. Select the option to install JetAdmin and follow the instructions on the screen.

Step 2 - Configure the JetDirect Print Server

1. Log onto the network with Supervisor privileges at any user workstation that has

the HP JetAdmin installed.

2. Click Start, Programs, HP JetAdmin Utlities, and HP JetAdmin, to run HP

JetAdmin.

3. The following message may appear: "JetAdmin could not find any configured

devices on your network. Do you want to configure one now?". Click Yes and

proceed to 5. If this message is not displayed, go to 4.

4. On the HP JetAdmin Utility screen, press [F5] to refresh the list of printers. All

configured print servers are displayed.

5. Select Device, New. On the New Device screen, highlight the LAN hardware address

of your print server. (The 12-character hardware address is on the HP JetDirect

configuration page.)

6. Click Configure. A General screen appears.

7. Type the name of the print server and a description (optional): then click Next. A

NetWare configuration screen appears.

8. Click Operating Mode and select Queue Server Mode.

9. Click Queues and then click Change.

10. Select your NetWare server from the list and click Create.

11. Type a name for this printer queue in the Create Queue screen and click OK.

12. Click Yes to add the queue to the list of serviced queues.

13. The configured queues appears under Serviced Queues, click OK.

14. Follow the instructions to complete configuration.

Step 3 - Copy Printer Software to a Network Drive for Client Installation

Please refer to section 6.2 for the procedure on installing the HP 2500C Series Printer

Software.