CM Professional Series Color Printer - (English) Network Guide

6.7 Installing Alternate Drivers

If your server is running Windows NT 4.0 and you wish to install

Windows 95 or 98 drivers to client computers over the network, you

may do so if you have installed an alternate driver in your server.

To install an alternate driver in your server:

1. Insert the Starter CD into the CD-ROM drive.

2. Click the Start button on the taskbar.

3. Select Settings, followed by Printers to open the Printers folder.

Right-click on the HP 2500C Series Printer icon and select

Sharing.

4. Select Shared and type in a Share Name of your choice.

5. Select Windows 95 under Alternate Drivers.

6. When prompted to insert disk, click OK.

7. In the Copy Files From: box, type d:\ drivers\nt295\ where

d:\ is your CD-ROM drive. You may also click Browse and

point to the directory to be installed from.

8. Click OK and follow the instructions on screen to complete

installation.

6.8 Installing PostScript Driver

Option 1

1. Insert the HP 2500C/C+/CM Adobe PostScript 3 CD-ROM into your

CD-ROM drive and run INSTALL.EXE.

2. Follow the instructions on the screen and select HP 2500C Series

PS3 Printer in the PPD description.

3. Follow the instructions to complete the installation and verify your

setup with the self-test page (for Windows 95, 98 and NT only).

Option 2

1. Copy the entire contents of the HP 2500C/C+/CM Adobe PostScript

3 CD-ROM to a folder in your server.

2. Assign (Map) a drive letter to your network folder.

3. Run INSTALL.EXE.

4. Follow the instructions on the screen and select HP 2500C Series

PS3 Printer in the PPD description.

5. Follow the instructions to complete the installation and verify your

setup with the self-test page (for Windows 95, 98 and NT only).