HP 2500C/C+/CM Professional Series Color Printer - (English) User's Guide
Table Of Contents
- Contents
- Printer Basics
- Step 1 - Unpack the Printer
- Step 2 - Remove All Tapes from the Printer
- Step 3 - Connect Cables
- Step 4 - Set LCD Language Preference
- Step 5 - Install Ink Cartridges
- Step 6 - Install Printheads
- Step 7 - Load Paper in Tray 2
- Step 8 - Load Paper in Tray 3
- Step 9 - Align Printheads
- Step 10 - Install the Printer Software
- Basic Printing Tasks
- Maintaining the Printer
- Installing the PostScript Module
- Installing Additional Memory
- LCD Messages
- Troubleshooting
- Understanding the Diagnostic Test
- Customer Support
- HP Supplies and Accessories
- Printer Specifications
- Minimum Printing Margins
- Hewlett-Packard Limited Warranty Statement
- Declaration of Conformity
- Regulatory Notices
1
5
6
4
9
4. Close the printhead latch. Be sure that the hook on the printhead latch
catches the carriage lock.
Note: You may have to use some force to close the printhead latch.
5. Ensure that the Ink Cartridge Door is lifted. Align the tabs of the cover
with the tabs on the printer.
6. Lower and snap to close the cover.
7. Close the Ink Cartridge Door.
Note: Tray 2 is a fixed tray. Tray 1 has to be removed before Tray 2 can be accessed.
Tray 2 is designed to hold up to 150 sheets of paper and can accomodate paper
sizes such as Letter, A4, Legal, B4, A3, 11” x 17”, 13” x 19” and 330 x 483 mm.
1. Remove Tray 1 and set it aside.
2. If you are loading paper sizes such as B4, A3, 11” x 17” and
330 x 483 mm, unlock the tray lock, extend the tray and re-lock the
tray lock.
2500C/C+/CM
HP
Step 7 - Load Paper in Tray 2
2