HP 2500C/C+/CM Professional Series Color Printer - (English) User's Guide
Table Of Contents
- Contents
- Printer Basics
- Step 1 - Unpack the Printer
- Step 2 - Remove All Tapes from the Printer
- Step 3 - Connect Cables
- Step 4 - Set LCD Language Preference
- Step 5 - Install Ink Cartridges
- Step 6 - Install Printheads
- Step 7 - Load Paper in Tray 2
- Step 8 - Load Paper in Tray 3
- Step 9 - Align Printheads
- Step 10 - Install the Printer Software
- Basic Printing Tasks
- Maintaining the Printer
- Installing the PostScript Module
- Installing Additional Memory
- LCD Messages
- Troubleshooting
- Understanding the Diagnostic Test
- Customer Support
- HP Supplies and Accessories
- Printer Specifications
- Minimum Printing Margins
- Hewlett-Packard Limited Warranty Statement
- Declaration of Conformity
- Regulatory Notices
6
1
11
Note: Tray 3 is designed to hold up to 250 sheets of paper and can accommodate
paper sizes such as Letter, A4, Legal, B4, A3, 11” x 17”, 13” x 19” and
330 x 483 mm.
1. Grasp the sides of Tray 3 and pull it out of the printer.
2. If you are loading paper sizes such as B4, A3, 11” x 17” and
330 x 483 mm, unlock the tray lock, extend the tray and re-lock the
tray lock.
3. Unpack the Paper Length and Width guides.
4. Insert the Paper Length guide into the slot of the paper size you wish
to load.
5. Insert the Paper Width guide into the slot of the paper size you wish
to load.
6. Load paper by aligning the paper edge to the Paper Length guide
first. Tap the other end of the paper to ensure that the paper is
properly loaded. Tap the left side of the stack of paper to ensure that
it is flush against the right side of the tray.
2500C/C+/CM
HP
Step 8 - Load Paper in Tray 3
2
3
4
5