HP 2500C/C+/CM Professional Series Color Printer - (English) User's Guide
Table Of Contents
- Contents
- Printer Basics
- Step 1 - Unpack the Printer
- Step 2 - Remove All Tapes from the Printer
- Step 3 - Connect Cables
- Step 4 - Set LCD Language Preference
- Step 5 - Install Ink Cartridges
- Step 6 - Install Printheads
- Step 7 - Load Paper in Tray 2
- Step 8 - Load Paper in Tray 3
- Step 9 - Align Printheads
- Step 10 - Install the Printer Software
- Basic Printing Tasks
- Maintaining the Printer
- Installing the PostScript Module
- Installing Additional Memory
- LCD Messages
- Troubleshooting
- Understanding the Diagnostic Test
- Customer Support
- HP Supplies and Accessories
- Printer Specifications
- Minimum Printing Margins
- Hewlett-Packard Limited Warranty Statement
- Declaration of Conformity
- Regulatory Notices
![](/manual/hp/hp-2500c-printer/hp-2500cccm-professional-series-color-printer-english-users-guide/images/img-33.png)
Item Explanation
ALIGN PRNT-HDS This item aligns the printheads to ensure the printout is of the best
possible print quality.
For more information see section on Align Printheads.
CLEAN PRNT-HD: This item cleans the printheads. Level 1 is the basic level and should
LEVEL 1 be performed first.
For more information see section on Clean Printheads.
CLEAN PRNT-HD: This item cleans the printheads. Level 2 is more thorough than Level 1,
LEVEL 2 but it should be performed only when Level 1 cleaning does not solve
the print quality problem.
For more information see section on Clean
Printheads.
CLEAN PRNT-HD: This item cleans the printheads. Level 3 is most thorough, but it
LEVEL 3 should be performed only when Level 2 cleaning does not solve the
print quality problem as it uses the most ink.
For more information
see section on Clean Printheads.
PERFORM TRAY 2 This item performs a paper path test on Tray 2. When this is selected,
PAPER PATH TEST the printer will pick paper from Tray 2 until all the paper has been
ejected.
PERFORM TRAY 3 This item performs a paper path test on Tray 3. When this is selected,
PAPER PATH TEST the printer will pick paper from Tray 3 until all the paper has been
ejected.
PERFORM TRAY 1 This item performs a paper path test on Tray 1. When this is selected,
PAPER PATH TEST the printer will pick paper from Tray 1 until all the paper has been
ejected.
29
Diagnostics Menu
Item Explanation
CHECK INK LEVEL This item displays the amount of ink remaining in each ink cartridge.
BASE FW VER This item displays the firmware version of the printer.
PS FW VER This item displays the PostScript firmware version of the printer.
MIO FW VER This item displays the MIO print server firmware version.
CHECK TOTAL This item displays the total amount of RAM installed in the printer.
RAM SIZE
SERVICE ID This item displays the Service Identification Number of the printer.
This number is needed when you call the HP Customer Care Center
for support.
Information Menu