HP 2500C/C+/CM Professional Series Color Printer - (English) User's Guide
Table Of Contents
- Contents
- Printer Basics
- Step 1 - Unpack the Printer
- Step 2 - Remove All Tapes from the Printer
- Step 3 - Connect Cables
- Step 4 - Set LCD Language Preference
- Step 5 - Install Ink Cartridges
- Step 6 - Install Printheads
- Step 7 - Load Paper in Tray 2
- Step 8 - Load Paper in Tray 3
- Step 9 - Align Printheads
- Step 10 - Install the Printer Software
- Basic Printing Tasks
- Maintaining the Printer
- Installing the PostScript Module
- Installing Additional Memory
- LCD Messages
- Troubleshooting
- Understanding the Diagnostic Test
- Customer Support
- HP Supplies and Accessories
- Printer Specifications
- Minimum Printing Margins
- Hewlett-Packard Limited Warranty Statement
- Declaration of Conformity
- Regulatory Notices
Item Explanation
PRINT MENU MAP The Menu Map shows the layout of the Control Panel menu items.
PRINT PS FONT LIST The PS Font List shows all the PS fonts currently available to the printer.
PRINT DIAGNOSTIC The Diagnostic Page shows general printer information and current
PAGE network parameters.
PRINT EXT The Extended Diagnostic Page shows printer information that is useful
DIAGNOSTIC PAGE for troubleshooting.
30
Item Values Explanation
PRINT QUALITY= NORMAL NORMAL: Normal mode delivers high quality
NORMAL ECONOFAST output and is the recommended setting for
BEST speed and quality. Normal mode is the
default setting for most paper types.
ECONOFAST: Draft quality printing.
EconoFast mode prints faster than Normal
mode and delivers comparable output.
Using EconoFast will also cut down on the
frequency of replacing your ink cartridges
because it uses less ink. EconoFast
printing is available only when you select
plain paper or transparency as the paper type.
BEST: High quality printing. Best mode
produces the highest print quality for all
paper types. However, Best mode prints
more slowly than Normal mode for most
documents.
Print Quality Menu
Self Test Menu