HP 2500C/C+/CM Professional Series Color Printer - (English) User's Guide
Table Of Contents
- Contents
- Printer Basics
- Step 1 - Unpack the Printer
- Step 2 - Remove All Tapes from the Printer
- Step 3 - Connect Cables
- Step 4 - Set LCD Language Preference
- Step 5 - Install Ink Cartridges
- Step 6 - Install Printheads
- Step 7 - Load Paper in Tray 2
- Step 8 - Load Paper in Tray 3
- Step 9 - Align Printheads
- Step 10 - Install the Printer Software
- Basic Printing Tasks
- Maintaining the Printer
- Installing the PostScript Module
- Installing Additional Memory
- LCD Messages
- Troubleshooting
- Understanding the Diagnostic Test
- Customer Support
- HP Supplies and Accessories
- Printer Specifications
- Minimum Printing Margins
- Hewlett-Packard Limited Warranty Statement
- Declaration of Conformity
- Regulatory Notices
32
Item Values Explanation
IN JOB TIMEOUT= 5 to 300 Select the amount of time (in seconds) that
15 the printer will wait within a print job before
ending it. When the data from a print job
fails to be sent to the printer completely,
the printer will wait for the specified number
of seconds. After that, it will abort the job
and carry on to process the next print job.
Press [Value] once to change the setting by
increments of 1 or hold down [Value] to scroll.
OUT JOB TIMEOUT= 0 to 300 Select the amount of time (in seconds) that
15 the printer will wait for the next print job
before switching to another port. This is
useful especially when your printer is
connected to 2 different ports such as the
parallel port and the network port.
Press [Value] once to change the setting by
increments of 1 or hold down [Value] to scroll.
I/O CHANNEL 0 to 300 Select the amount of time (in seconds) that
TIMEOUT=120 the printer will receive data from a port
before switching to the next port. When
the printer is connected to different ports
with data being sent to it simultaneously
from these ports, the printer will be able to
toggle between ports so that jobs sent
through all ports will be given similar priority.
Press [Value] once to change the setting by
increments of 1 or hold down [Value] to scroll.
IO Menu
Item Explanation
RESET TO FACTORY This item performs a simple reset and restores most of the factory
SETTINGS (default) settings. This item also clears the input buffer for the active I/O.
RESET ACTIVE I/O This item performs a simple reset and clears the input and output
CHANNEL buffers (for the active I/Os only).
RESET ALL I/O This item performs a simple reset and clears the input and output
CHANNELS buffers for all I/Os.
RESET MIO TO This item resets the MIO print server and restores most of the
FACTORY SETTINGS factory (default) settings.
Resets Menu