HP 2500C/C+/CM Professional Series Color Printer - (English) User's Guide
Table Of Contents
- Contents
- Printer Basics
- Step 1 - Unpack the Printer
- Step 2 - Remove All Tapes from the Printer
- Step 3 - Connect Cables
- Step 4 - Set LCD Language Preference
- Step 5 - Install Ink Cartridges
- Step 6 - Install Printheads
- Step 7 - Load Paper in Tray 2
- Step 8 - Load Paper in Tray 3
- Step 9 - Align Printheads
- Step 10 - Install the Printer Software
- Basic Printing Tasks
- Maintaining the Printer
- Installing the PostScript Module
- Installing Additional Memory
- LCD Messages
- Troubleshooting
- Understanding the Diagnostic Test
- Customer Support
- HP Supplies and Accessories
- Printer Specifications
- Minimum Printing Margins
- Hewlett-Packard Limited Warranty Statement
- Declaration of Conformity
- Regulatory Notices
38
Non-Recoverable Error
If the LCD panel displays a non-recoverable error message or if the printer
is in a non-recoverable error state:
1. Turn off your printer by pressing the Power button. Remove all
cables and wait for about 10 seconds. Reconnect the cables and
power on the printer.
2. If the printer powers on and recovers from the error state, you
should see the message “READY” on the LCD panel.
3. Make sure that the tapes covering the ink nozzles and electrical
contacts on all the printheads have been removed.
For information on how to remove the tapes, see section on Replacing Printheads.
4. If the error persists we recommend that you call HP for assistance.
Please have the following information ready:
• the model
• the printer serial number
• the error code number
Troubleshooting Feature in Toolbox
If a printing problem occurs, you can use the online troubleshooting
feature built into your HP 2500C Series Toolbox. In the Toolbox, click the
Troubleshooting tab. The troubleshooting information in the HP 2500C
Series Toolbox is designed to help you diagnose and solve most printing
problems that can occur.
To use the troubleshooting feature in the HP 2500C Series Toolbox in
Windows 95, 98 and NT 4.0:
1. Double-click the HP 2500C Series Toolbox icon on your computer
desktop or click on Start, select Programs, followed by HP 2500C
Series program group, followed by HP 2500C Toolbox.
2. Click on the Troubleshooting tab, then follow the instructions on
your computer screen.
To use the troubleshooting feature in the HP 2500C Series Toolbox in
Windows 3.1x:
1. Double-click the HP 2500C Series Toolbox icon in the HP 2500C
Series Printer program group.
2. Click on the Troubleshooting tab, then follow the instructions on
your computer screen.