HP 2500C/C+/CM Professional Series Color Printer - (English) User's Guide
Table Of Contents
- Contents
- Printer Basics
- Step 1 - Unpack the Printer
- Step 2 - Remove All Tapes from the Printer
- Step 3 - Connect Cables
- Step 4 - Set LCD Language Preference
- Step 5 - Install Ink Cartridges
- Step 6 - Install Printheads
- Step 7 - Load Paper in Tray 2
- Step 8 - Load Paper in Tray 3
- Step 9 - Align Printheads
- Step 10 - Install the Printer Software
- Basic Printing Tasks
- Maintaining the Printer
- Installing the PostScript Module
- Installing Additional Memory
- LCD Messages
- Troubleshooting
- Understanding the Diagnostic Test
- Customer Support
- HP Supplies and Accessories
- Printer Specifications
- Minimum Printing Margins
- Hewlett-Packard Limited Warranty Statement
- Declaration of Conformity
- Regulatory Notices
2
Significant Cost Savings and Speed Gains with HP’s New Modular Ink
Delivery System (MIDS).
• New half-inch printheads print larger swathes to achieve
significant speed gains of up to 11 ppm black, 9 ppm color.
• HP’s new Modular Ink Delivery System communicates with a smart
chip built into each printhead and ink cartridge to monitor ink
levels and printhead life.
• Printing in color becomes more affordable with lower costs per page.
Exceeds your Workgroup’s Color Expectations with HP PhotoREt II (up to 13”x19”)
• PhotoREt II uses the smallest ink drop size to create more shades
of color, smoother transitions between tones, and crisper-looking
output on any paper.
• Prints up to 13”x19” / A3 oversize when you need it.
Printer Parts and Locations
Top Cover
Printhead Latch
Power
Button
Tray 3
Tray 2
Paper
Knob
Printhead
Access Cover
Ink Cartridge
Door
Rear Access
Door
Back Panel
Tray 1/
Output Tray
Extended
Tray Cover
LCD Panel
Menu Button
Item Button
Value Button
Select Button
Cancel Job
Button
Attention (Red)
Ready (Green)
(Go)
Control Panel Layout